Technical information

Oy Western Shipyard Ltd is located in Teijo, 20 km from the center of Salo. The ship lane from the Baltic Sea leading to WSY starts from Hanko and leads through Strömma channel. The depth of the ship lane is 5.1 meters.

The main shipyard area consists of dry docks 1 and 2, a outfitting dock, and a workshop hall. The upper dry dock is approx. 0.5 meter above the sea level and the height of the dock gates can be increased allowing 4.5 meters of water to be pumped over the upper level. This makes it possible to do dockings in and out from the dry dock 1 without causing interruptions to work at upper level. Longer repairs can take place on the dry dock 2.

The shipyard area is throughout fenced, guarded and monitored 24 hours/day.

 

Dry dock 1

Dry dock 2

Width of the dock gate 21 m and depth 4.5 m Length 130 m and width 20 m
Length 160 m and width 27 m Depth 3.3 m
Boom crane with a lifting capacity of 25 tons Crane with a maximum capacity of 4 tons
Crane with a maximum capacity of 4 tons Accessible by truck
3 x 125 Amp, 1 x 200 Amp 2 x 125 Amp, 1 x 200 Amp

Workshop

Outfitting dock

Lifting capacity: 2 x 12,5 tons Length 50 meters.  Situated in the front of the dry docks.
Doorway: 7 x 7 m
Length 50 meters, width 20 meters, height 10 meters

 
WSY on osa APX-Metalli Oy -konsernia